27018 Debris Removal DEB: The debris removal chemical filter is not present UDRC Cause 1: The correct nozzle sensor must be selected for the nozzle. Solution: The firmware must be told which nozzle sensor to use:0 = Particulate only collection (POC)1 = Not currently used2 = Thermal 1.73 = Thermal 2.04 = FlexographicSet sensor type (ST) to the appropriate number from the above table by using the command "set debris st __" then "nvs save debris" ..\..\ShowAllErrors.htmFirmware 0 Error Index ..\..\ShowAllCommands.htmFirmware 0 Command Index ..\..\ShowAllNVS.htmFirmware 0 NVS Index Updated: Wed Jul 16 19:34:14 2008 PST